Hellroaring Battery Isolator Combiners BIC-75300A with Remote Module
Dieser Eintrag stammt von UbuRoy Am 24.11.2009 @ 11:48 In Oldtimer&4x4, Globetrotting, Land Rover Serie/Defender TDI | 1 Kommentar
Von der Firma Hellroaring ([1] http://www.hellroaring.com) gibt es Battery Trenn Elektronik, keine Schaltrelais oder Schalter, sondern Solid State Relais (SSRs) die zwar SEHR teuer sind und zu allem überfluß auch noch bei Winchbetrieb an Dieselmotoren doppelt ausgelegt sein müssen, aber genial sind. einbauen und vergessen! Alles geht dann vollautomatisch.
Der Einbau gestaltet sich aber, trotz des hervorragenden Support durch Hellroaring nicht trivial! Darum hier die Originalschaltungen und techischen Details sowie in einem weiteren Beitrag die exakte und sonst nicht öffentlich verfügbare Einbauanleitung :
|
Features |
Typical 120 Amp, 2 Battery Diode Isolator |
Manual Solenoid Or Relay System |
Hellroaring BIC-75150A |
Hellroaring BIC-75300A |
| Automatic Isolation of 2 batteries |
Yes | No | Yes | Yes (multiple configuration options) |
| Automatic Isolation of 3 batteries |
No (yes, other models) | No | No | Yes * (multiple configuration options) |
| No Spark switching | N/A | No | Yes | Yes |
| Built-In capability to wire for cranking or winching current boost | No | Yes | Yes | Yes |
| Built-In capability to configure for engine cranking when main battery has zero charge remaining. | No | Maybe | No (will likely crank if allowed at least 15 minutes to transfer charge) |
Yes |
| Unit operation “ON” current draw is less than 0.012 Amps | N/A | No | Yes | Yes |
| Does not consume and dissipate power due to Main battery or Main system current | No (it does consume main system power!) |
Yes | Yes | Yes(depends on hookup configuration) |
| Can be used with up to 200 Amp alternator | No | Maybe (depends on auxiliary system load) |
Maybe (depends on auxiliary system load) |
Yes(depends on hookup configuration) |
| Power dissipated with 120 Amps from the alternator divided with 60 amps in main and 60 amps in auxiliary system | About 120 Watts | < 10 Watts | About 36 Watts | About 36 Watts or About 7 Watts (depends on which configuration you use) |
| Voltage drop at 5 amps to the auxiliary battery system | about 0.8 Volts | < 0.01 Volts (When New..) | < 0.05 Volts | < 0.05, <0.02, or < 0.01 Volts (depends on configuration used) |
| Has Built-In visual indicator used for system diagnostics / status | No | No | Yes | Yes |
| Has Remote indicator connection | No | No | Yes | Yes |
| Uses premium quality corrosion resistant connection hardware | No | No | Yes (solid brass and Stainless Steel) | Yes (solid brass and Stainless Steel) |
| Physical size less than 30 cubic inches | No | Maybe | Yes | Yes |
| Physical height less than 2 inches | No | No (Typical) | Yes | Yes |
| Inrush Currents Controlled | N/A | No | Yes | Yes |
| This is what you get when you order the BIC-75300A: | [2]  |
| BIC-75300A unit | |
| Sense Resistor | |
| Small external diode | |
| Terminal lugs | |
| Nuts | |
| Heat Shrink | |
| Prefabricated 6 AWG jumper wire | |
| Prefabricated ground wire with fuse | |
| Sheet Metal Screws | |
| Tie Wraps | |
| Cable Clamps |
A [3] Remote Module is available as a purchase option.:
Dieser Artikel wurde ausgedruckt ab Das unseelige JogiBlog: http://jogiblog.joerg-scheffler.info
URL zum Artikel: http://jogiblog.joerg-scheffler.info/2009/11/24/battery-isolator-combiners-bic-75300a-mit-remote-module/
URLs in this post:
[1] http://www.hellroaring.com: http://
[2] Image: http://www.hellroaring.com/images/BIC-75300A-kit-medium.jpg
[3] Remote Module: http://www.hellroaring.com/remote.php
Klicken hier zum Drucken.